[1]彭 俊,李益丰,符敏利.永磁同步电机铁耗的计算与研究[J].控制与信息技术(原大功率变流技术),2015,(01):61-65.[doi:10.13889/j.issn.2095-3631.2015.01.014]
 PENG Jun,LI Yifeng,FU Minli.Calculation and Study of Permanent Magnet Synchronous Motor Iron Loss[J].High Power Converter Technology,2015,(01):61-65.[doi:10.13889/j.issn.2095-3631.2015.01.014]
点击复制

永磁同步电机铁耗的计算与研究()
分享到:

《控制与信息技术》(原《大功率变流技术》)[ISSN:2095-3631/CN:43-1486/U]

卷:
期数:
2015年01期
页码:
61-65
栏目:
工业应用
出版日期:
2015-02-05

文章信息/Info

Title:
Calculation and Study of Permanent Magnet Synchronous Motor Iron Loss
文章编号:
2095-3631(2015)01-0061-05
作者:
彭 俊李益丰符敏利
南车电气技术与材料工程研究院
Author(s):
PENG JunLI YifengFU Minli
CSR Research of Electrical Technology & Material Engineering
关键词:
永磁同步电机铁耗计算有限元分析槽口宽度气隙长度偏心距供电方式
Keywords:
PMSM iron loss finite element analysis slot width gap length eccentricity power supply mode
分类号:
TM351
DOI:
10.13889/j.issn.2095-3631.2015.01.014
文献标志码:
A
摘要:
提出了一种考虑旋转磁化及谐波磁场、基于电磁场有限元分析及Bertotti 铁耗计算模型的永磁同步电机铁耗计算方法,并以某永磁同步电机产品为研究对象分析了定子槽口宽度、气隙长度、偏心距及不同供电方式等因素对铁耗的影响。
Abstract:
Taking into account of rotational magnetization and harmonic magnetic field, a calculation method of iron loss for permanent magnet synchronous motor (PMSM) was presented , which was based on finite element analysis and Bertotti iron loss calculation model. A real PMSM was studied as a subject to analyze the impact of stator slot width, air-gap length, eccentricity and power supply mode on iron loss.

参考文献/References:

[1]余莉,胡虔生,崔杨,等. 高速永磁无刷直流电动机铁耗的分析计算及实验[J]. 微特电机,2008(3) :11-13.
[2]Boglietti A,Lazzari M,Pastorelli M. A simplified method for the iron losses prediction in soft magnetic materials with arbitrary voltage supply[C]//IEEE-IAS Annual Meeting. Italy:Academic Press,2000:269-276.
[3]王继强,王凤翔. 高速永磁发电机的设计与电磁性能分析[J]. 中国电机工程学报,2008,28(20) :105-110.
[4]Lin D, Zhou P,Fu W N,et al. A dynamic core loss model for soft ferromagnetic and power ferrite materials in transient finite element analysis[J]. IEEE Transactions on Magnetics, 2004, 40(2) :1318-1321.
[5]黄允凯,胡虔生,朱健国. 永磁无刷直流电机铁耗计算方法[J]. 电机与控制应用,2007,34(4) :6-9.
[6]孔晓光,王凤翔,徐云龙,等. 高速永磁电机铁耗的分析和计算[J]. 电机与控制学报,2010,14(9) :26-30.
[7]黄平林,胡虔生,崔扬,等. PWM 逆变器供电下电机铁心损耗的解析计算[J]. 中国电机工程学报,2007,27(12) :19-23.

相似文献/References:

[1]石 敏,等.一种在超调区快速响应的PMSM无位置传感器控制策略[J].控制与信息技术(原大功率变流技术),2015,(01):10.[doi:10.13889/j.issn.2095-3631.2015.01.002]
 SHI Min,FENG Janghua,et al.A Strategy of Position Sensorless Control for PMSM Fast Response in Over-modulation Range[J].High Power Converter Technology,2015,(01):10.[doi:10.13889/j.issn.2095-3631.2015.01.002]
[2]陈慧民.电动汽车永磁同步电机堵转损坏机理分析及预防措施[J].控制与信息技术(原大功率变流技术),2015,(05):54.[doi:10.13889/j.issn.2095-3631.2015.05.011]
 CHEN Huimin.Damage Mechanism Analysis and Preventive Measures of the Stalled Permanent Magnet Synchronous Motor in Electric Vehicle[J].High Power Converter Technology,2015,(01):54.[doi:10.13889/j.issn.2095-3631.2015.05.011]
[3]丁 杰,张平,李益丰,等.永磁同步电机的三维流场温度场耦合计算[J].控制与信息技术(原大功率变流技术),2014,(06):46.[doi:10.13889/j.issn.2095-3631.2014.06.010]
 DING Jie,ZHANG Ping,LI Yifeng,et al.Coupling Calculation of 3D Flow Field & Temperature Field for Permanent Magnet Synchronous Motor[J].High Power Converter Technology,2014,(01):46.[doi:10.13889/j.issn.2095-3631.2014.06.010]
[4]郭淑英,李坤,彭俊.采用分数槽绕组降低永磁同步电机齿槽转矩的研究[J].控制与信息技术(原大功率变流技术),2013,(01):56.[doi:10.13889/j.issn.2095-3631.2013.01.013]
 GUO Shu-ying,LI Kun,PENG Jun.Study on Reducing Cogging Torque of Permanent Magnet Synchronous Motor with Fractional-slot Windings[J].High Power Converter Technology,2013,(01):56.[doi:10.13889/j.issn.2095-3631.2013.01.013]
[5]臧晓笛,田德文. 低开关频率下永磁同步电机弱磁区电流谐波抑制[J].控制与信息技术(原大功率变流技术),2016,(06):1.[doi:10.13889/j.issn.2095-3631.2016.06.200]
 ZANG Xiaodi,TIAN Dewen. Current Harmonic Suppression of Permanent Magnet Synchronous Motor in Weak Magnetic Field under Low Switching Frequency[J].High Power Converter Technology,2016,(01):1.[doi:10.13889/j.issn.2095-3631.2016.06.200]
[6]臧晓笛,田德文.低开关频率下永磁同步电机弱磁区电流谐波抑制[J].控制与信息技术(原大功率变流技术),2016,(06):1.[doi:10.13889/j.issn.2095-3631.2016.06.200]
 ZANG Xiaodi,TIAN Dewen.Current Harmonic Suppression of Permanent Magnet Synchronous Motor in Weak Magnetic Field under Low Switching Frequency[J].High Power Converter Technology,2016,(01):1.[doi:10.13889/j.issn.2095-3631.2016.06.200]
[7]解培金,刘卓,闫磊,等.沈阳地铁二号线车辆永磁同步牵引系统[J].控制与信息技术(原大功率变流技术),2012,(03):8.[doi:10.13889/j.issn.2095-3631.2012.03.002]
 XIE Pei-jin,LIU Zhuo,YAN Lei,et al.Permanent Magnet Synchronous Traction System for the Vehicles of Shenyang Metro Line 2[J].High Power Converter Technology,2012,(01):8.[doi:10.13889/j.issn.2095-3631.2012.03.002]
[8]梁波,彭辉水,刘雄.地铁车辆永磁同步牵引系统粘着控制研究[J].控制与信息技术(原大功率变流技术),2012,(03):17.[doi:10.13889/j.issn.2095-3631.2012.03.004]
 LIANG Bo,PENG Hui-shui,LIU Xiong.Research on Adhesion Control of the Permanent Magnet Synchronous Motor for Metro Vehicle Traction[J].High Power Converter Technology,2012,(01):17.[doi:10.13889/j.issn.2095-3631.2012.03.004]
[9]李华湘,元约平.永磁同步电机的气隙磁场研究及电机特性仿真[J].控制与信息技术(原大功率变流技术),2012,(03):31.[doi:10.13889/j.issn.2095-3631.2012.03.007]
 LI Hua-xiang,YUAN Yue-pin.Study of Air-gap Magnetic Field & Characteristic Simulation for PMSM[J].High Power Converter Technology,2012,(01):31.[doi:10.13889/j.issn.2095-3631.2012.03.007]
[10]文宇良,张朝阳,刘雄,等.基于无位置传感器的永磁同步电机带速度重新投入控制算法研究[J].控制与信息技术(原大功率变流技术),2012,(03):39.[doi:10.13889/j.issn.2095-3631.2012.03.008]
 WEN Yu-liang,ZHANG Chao-yang,LIU Xiong,et al.Calculation Research of Re-starting with Speed for PMSM Based on the Sensor-less[J].High Power Converter Technology,2012,(01):39.[doi:10.13889/j.issn.2095-3631.2012.03.008]

备注/Memo

备注/Memo:
收稿日期:2014-09-25
作者简介:彭俊(1985-),男,工程师,研究方向为永磁电机设计。
更新日期/Last Update: 2016-01-08