[1]姜耀伟,刘永丽,杨大成,等.级联型电力电子变流装置功率单元旁路方式分析[J].控制与信息技术(原大功率变流技术),2017,(06):19-22.[doi:10.13889/j.issn.2095-3631.2017.06.004]
 JIANG Yaowei,LIU Yongli,YANG Dacheng,et al.Analysis of Power Cell Bypass for Power Electronic Converter Based on Cascaded Module[J].High Power Converter Technology,2017,(06):19-22.[doi:10.13889/j.issn.2095-3631.2017.06.004]
点击复制

级联型电力电子变流装置功率单元旁路方式分析()
分享到:

《控制与信息技术》(原《大功率变流技术》)[ISSN:2095-3631/CN:43-1486/U]

卷:
期数:
2017年06期
页码:
19-22
栏目:
变流与控制
出版日期:
2017-12-05

文章信息/Info

Title:
Analysis of Power Cell Bypass for Power Electronic Converter Based on Cascaded Module
文章编号:
2095-3631(2017)06-0019-04
作者:
姜耀伟 1刘永丽2杨大成1周 阳1
(1. 中车株洲所电气技术与材料工程研究院,湖南株洲 412001;2. 株洲中车时代电气股份有限公司,湖南株洲 412001)
Author(s):
JIANG Yaowei1 LIU Yongli2 YANG Dacheng1 ZHOU Yang1
(1. CRRC ZIC Research Institute of Electrical Technology & Material Engineering, Zhuzhou, Hunan 412001,China; 2. Zhuzhou CRRC Times Electric Co., Ltd., Zhuzhou, Hunan 412001,China)
关键词:
可靠性旁路结构冗余级联电力电子变流装置
Keywords:
reliability bypass structure redundancy cascaded power electronic converter
分类号:
TM46
DOI:
10.13889/j.issn.2095-3631.2017.06.004
文献标志码:
A
摘要:
针对级联型电力电子变流装置的功率单元故障,介绍了三相对称旁路、中性点偏移和功率单元冗余等 3 种旁路技术的处理策略,对比分析了功率单元不同旁路结构的工作原理、性能优缺点和适用范围,并分析了功率单元旁路结构对变流装置可靠性的影响。
Abstract:
It analyzed the solutions for failure of the cascaded power electronic converter, such as the sym-bypass in three-phase, neutral point drift technology and redundant power cell, and introduced the operation principle, the characteristic of different bypass structures for power cell and the discussion for the applications of the bypass structure in different situation. The influence of bypass structure for power cell on the reliability of converter was also analyzed.

参考文献/References:

[1]倪喜军,赵剑锋,曹武,等. 级联型逆变器故障状况下的调制重构[J]. 中国电机工程学报,2010,30(33):16-22.
 NI X J, ZHAO J F, CAO W, et al. Modulation Reconfiguration of Cascaded Multilevel Inverters Under Fault Condition[J]. Proceedings of the CSEE, 2010, 30(33):16-22.
[2]许胜,赵剑锋,许杏桃. 改进型级联H 桥型DSTATCOM 装置 n+1 冗余容错控制策略[J]. 电力自动化设备,2010,30(7): 54-59.
XU S, ZHAO J F, XU X T. Improved n+1 redundant fault-tolerant control strategy of cascaded H-bridge DSTATCOM[J]. Electric Power Automation Equipment, 2010, 30(7):54-59.
[3]李子欣,王平,楚遵方,等. 面向中高压智能配电网的电力电子变压器研究[J]. 电网技术,2013,37(9):2592-2601.
LI Z X, WANG P, CHU Z F, et al. Research on Medium-and High-Voltage Smart Distribution Grid Oriented Power Electronic Transformer[J]. Power System Technology, 2013, 37 (9):2592- 2601.
[4]张晓东. 电力电子变压器及其在电力系统中的应用[D]. 济南:山东大学,2012.
[5]张振华. H 桥级联多电平静止无功补偿器的控制策略研究[D]. 杭州:浙江大学,2012.
[6]GRIGGS M, KLUG R D, TEJWANI L. MW 级交流传动方案的可靠性和可利用率[J]. 变频器世界,2005(5):48-54.
[7]季振东. 级联型电力电子变压器关键技术研究[D]. 南京:东南大学,2015.
[8]郑成阳,崔杨. 具有旁通功能和故障恢复功能的变频器:中国, CN200959575[P]. 2007-10-10.

相似文献/References:

[1]张 明.大功率半导体器件的可靠性评估[J].控制与信息技术(原大功率变流技术),2015,(01):1.[doi:10.13889/j.issn.2095-3631.2015.01.001]
 ZHANG Ming.Reliability Evaluation of High Power Semiconductors[J].High Power Converter Technology,2015,(06):1.[doi:10.13889/j.issn.2095-3631.2015.01.001]
[2]Thomas Stiasny,Vasileios Kappatos,Thomas Setz,等.IGCT——更高功率处理能力的正确选择[J].控制与信息技术(原大功率变流技术),2015,(06):1.[doi:10.13889/j.issn.2095-3631.2015.06.001]
 Thomas Stiasny,Vasileios Kappatos,Thomas Setz,et al.Where Higher Power Handling Capability is Required - IGCT is the Right Choice[J].High Power Converter Technology,2015,(06):1.[doi:10.13889/j.issn.2095-3631.2015.06.001]
[3]张西应,颜 骥,任亚东.应力- 强度干涉模型在功率半导体器件失效分析中的应用[J].控制与信息技术(原大功率变流技术),2016,(01):34.[doi:10.13889/j.issn.2095-3631.2016.01.008]
 ZHANG Xiying,YAN Ji,REN Yadong.Application of Stress-strength Interference Model in Failure Analysis of Power Semiconductor Device[J].High Power Converter Technology,2016,(06):34.[doi:10.13889/j.issn.2095-3631.2016.01.008]
[4]席力克,刘 凌,宋 超,等.混合动力客车动力总成用联接器的可靠性提升设计[J].控制与信息技术(原大功率变流技术),2016,(01):53.[doi:10.13889/j.issn.2095-3631.2016.01.012]
 XI Like,LIU Ling,SONG Chao,et al.Reliability Improved Design of the Coupler for Hybrid Bus Power-train[J].High Power Converter Technology,2016,(06):53.[doi:10.13889/j.issn.2095-3631.2016.01.012]
[5]杨柳,赵萍,吕杏梅,等.兆瓦级风电机组主传动系统结构研究进展[J].控制与信息技术(原大功率变流技术),2013,(04):28.[doi:10.13889/j.issn.2095-3631.2013.04.008]
 YANG Liu,ZHAO Ping,LV Xing-mei,et al.Advance Research on Main Drive System Structures of Multiple Megawatt Wind Turbines[J].High Power Converter Technology,2013,(06):28.[doi:10.13889/j.issn.2095-3631.2013.04.008]
[6]徐凝华,彭勇殿,罗海辉,等.热循环过程中 IGBT 模块封装退化研究[J].控制与信息技术(原大功率变流技术),2016,(04):23.[doi:10.13889/j.issn.2095-3631.2016.04.005]
 XU Ninghua,PENG Yongdian,LUO Haihui,et al.Study of the Package Degradation of IGBT Module during Thermal Cycling Test[J].High Power Converter Technology,2016,(06):23.[doi:10.13889/j.issn.2095-3631.2016.04.005]
[7]邓小川,陈茜茜,王弋宇,等.1 200 V SiC MOSFET 晶体管的高温可靠性研究[J].控制与信息技术(原大功率变流技术),2016,(05):62.[doi:10.13889/j.issn.2095-3631.2016.05.013]
 DENG Xiaochuan,CHEN Xixi,WANG Yiyu,et al.High-temperature Reliability of 1 200 V SiC Power MOSFETs[J].High Power Converter Technology,2016,(06):62.[doi:10.13889/j.issn.2095-3631.2016.05.013]
[8]王彦刚,等. 电动汽车功率模块平面封装技术[J].控制与信息技术(原大功率变流技术),2017,(05):36.[doi:10.13889/j.issn.2095-3631.2017.05.005]
 WANG Yangang,LIU Xuyu,et al. Planar Packaging Technology of Power Semiconductor Module for Electric Vehicle[J].High Power Converter Technology,2017,(06):36.[doi:10.13889/j.issn.2095-3631.2017.05.005]
[9]王彦刚,等.电动汽车功率模块平面封装技术[J].控制与信息技术(原大功率变流技术),2017,(05):36.[doi:10.13889/j.issn.2095-3631.2017.05.005]
 WANG Yangang,LIU Xuyu,et al.Planar Packaging Technology of Power Semiconductor Module for Electric Vehicle[J].High Power Converter Technology,2017,(06):36.[doi:10.13889/j.issn.2095-3631.2017.05.005]
[10]钱建波,黄世东.IGBT 用氮化铝覆铜衬板可靠性研究[J].控制与信息技术(原大功率变流技术),2017,(05):55.[doi:10.13889/j.issn.2095-3631.2017.05.009]
 QIAN Jianbo,HUANG Shidong.Research on the Reliability of Aluminum Nitride Ceramic Substrate for IGBT[J].High Power Converter Technology,2017,(06):55.[doi:10.13889/j.issn.2095-3631.2017.05.009]

备注/Memo

备注/Memo:
收稿日期:2017-06-13
作者简介:姜耀伟(1986-),男,工程师,主要从事大功率变流装置的开发设计工作。
基金项目:国家重点研发计划(2017YFB1200900)
更新日期/Last Update: 2017-12-18