[1]刘可安,李诚瞻,李彦涌,等.SiC 器件技术特点及其在轨道交通中的应用[J].控制与信息技术(原大功率变流技术),2016,(05):13-17.[doi:10.13889/j.issn.2095-3631.2016.05.003]
 LIU kean,LI Chengzhan,LI Yangyong,et al.Characteristics of SiC Device and its Application in Railway Traction[J].High Power Converter Technology,2016,(05):13-17.[doi:10.13889/j.issn.2095-3631.2016.05.003]
点击复制

SiC 器件技术特点及其在轨道交通中的应用()
分享到:

《控制与信息技术》(原《大功率变流技术》)[ISSN:2095-3631/CN:43-1486/U]

卷:
期数:
2016年05期
页码:
13-17
栏目:
综述·评论
出版日期:
2016-10-05

文章信息/Info

Title:
Characteristics of SiC Device and its Application in Railway Traction
文章编号:
2095-3631(2016)05-0013-05
作者:
刘可安 12李诚瞻12李彦涌12李 华12
(1. 新型电力电子器件国家重点实验室,湖南株洲 412001;2. 株洲中车时代电气股份有限公司,湖南株洲 412001)
Author(s):
LIU kean 12 LI Chengzhan 12 LI Yangyong 12 LI Hua 12
( 1. State Key Laboratory of Advanced Power Semiconductor Device, Zhuzhou, Hunan 412001, China; 2. Zhuzhou CRRC Times Electric Co., Ltd., Zhuzhou, Hunan 412001, China )
关键词:
SiC 器件功率模块轨道交通牵引变流器
Keywords:
SiC device power module railway traction traction converter
分类号:
TN304.2+4;U264.3+7
DOI:
10.13889/j.issn.2095-3631.2016.05.003
文献标志码:
A
摘要:
SiC 器件具有高温、高频和低损耗的性能优势,将其应用于逆变器装置中,可有效提高系统效率,降低能耗,减小系统的体积和重量。本文基于SiC 芯片和模块的技术特点分析,介绍了SiC 器件在国内外轨道交通领域的应用情况,证实了SiC 器件的采用有利于牵引变流装置的小型化和轻量化,能满足轨道交通绿色智能发展的要求。
Abstract:
Due to the intrinsic advantages such as high temperature, high frequency and low loss, SiC device is considered to perform higher efficiency, lower energy loss and lower volume and weight of system when applied to inverter. Based on the analysis of technical characteristics of SiC device and module, it presented the application of SiC devices in railway traction at home and abroad, and confirmed the application of SiC device was propitious to smaller size and lighter weight of traction converter, which was conformed to the demands of green intelligence development of railway traction.

参考文献/References:

[1]HULL B A. HENNING J, JONAS C, et al. 1 700 V 4H-SiC MOSFETs and Schottky Diodes for Next Generation Power Conversion Applications[C]//APEC, 2011:1042-1048.
[2]潘三博,郝夏斐. 采用碳化硅器件的高效率光伏逆变器研究[J]. 制造业自动化,2011,33(4):131.
[3]BRENNA M,FOIADELLI F, ZANINELLI D, et al. Application prospective of silicon carbide (SiC) in railway vehicles[C]//AEIT, 2014:1-6.
[4]WATANABE T. Trend of railway technologies and power semiconductor devices[C]// The 11th ISPSD, 1999:11-18.
[5]ISHIKAWA K, OGAWA K, YUKUTAKA S, et al. Traction inverter that applies compact 3.3 kV/1200 A SiC Hybrid module[C]// IPEC-Hiroshima 2014 – ECCE Asia, 2014:2140-2144.
[6]CASARIN J, LADOUX P, LASSERRE P, et al. 10 kV SiC MOSFET versus 6.5 kV Si-IGBTs for medium frequency transformer application in railway traction[C]//ESARS, 2015 :1-6.
[7]KIEFERNDORF F, DROFENIK U, AGOSTINI F, et al. Modular PET, two–phase air-cooled converter cell design and performance evaluation with 1.7 kV IGBT for MV application[C]//APEC, 2016:472-479.
[8]李诚瞻,王弋宇,史晶晶,等. 碳膜保护对高温激活SiC 表面形貌的影响[J]. 电子器件, 2014,37(6):1030-1033.
[9]赵艳黎,李诚瞻,蒋华平,等. SiC 高温氧化工艺开发和界面特性分析[J]. 大功率变流技术,2015(1):36-38.
[10]WANG Y Y, PENG Z Y, SHEN H J, et al. Characterization of the effects of nitrogen and hydrogen passivation on SiO2/4H-SiC interface by low temperature conductance measurements[J]. Journal of Semiconductors,2016,37 (2): 026001-1-026001-7.
[11]邵云,史晶晶,李诚瞻,等,高性能碳化硅混合功率模块研制[J]. 大功率变流技术,2013(2):5-7.
[12]郑昌伟,常桂钦,李诚瞻. 1700 V/1600 A 高性能SiC 混合 IGBT 功率模块的研制[J]. 大功率变流技术,2015(5):43-48.
[13]HEFNER A R, SINGH R, LAI J,et al. SiC Power Diodes Provide Breakthrough Performance for a Wide Range of Applications[J]. IEEE Transactions on Power Electronics, 2001,16(2):273-280.
[14]BHATNAGAR M,BALIGA B J. Comparison of 6H-SiC, 3C-SiC and Si for power devices[J]. IEEE Transactions on Electron Devices, 1993,40(3):645-655.
[15]ROTHMUND D, BORTIS D, KOLAR J W. Accurate transient calorimetric measurement of soft-switching losses of 10 kV SiC MOSFETs[C]//PEDG, 2016:1-10.
[16]ZHANG Y M, ZHANG Y M, TANG X Y, et al. 4H-SiC Junction Barrier Schottky Diode with Embedded P-Layer[C]//EDSSC, 2010:1-5.
[17]SOLER V, CABELLO M, MONTSERRAT J, et al. 4.5 kV SiC MOSFET with boron doped gate dielectric[C]//ISPSD,2016: 283-286.
[18]陈治明,李守智.宽禁带半导体电力电子器件及其应用[M].北京:机械工业出版社,2009:44-45.
[19]MIRZAEE H, BHATTACHARYA S, RYU Sei-Hyung, et al. Design Comparison of 6.5 kV Si-IGBT, 6.5 kV SiC JBS Diode, and 10 kV SiC MOSFETs in Megawatt Converters for Shipboard Power System[C]//IEEE ECCE, 2011:2421-2428.
[20]DIMARINO C, CHEN Z, BOROYECICH D, et al. Characterization and comparison of 1.2 kV SiC power semiconductor devices[C]// EPE,2013:1-10.
[21]刘恩科,朱秉升,罗晋生. 半导体物理学[M].北京:电子工业出版社,2008:76-78. [22]SCHADT M, PENSL G, DEVATY R P, et al. Anisotropy of the electron Hall mobility in 4H, 6H, and 15R silicon Carbide[J]. Appl. Phys. Lett.,1994 (65):3120-3122.
[23]DIMARINO C, CHEN Z, DANILOVIC M, et al. High temperature characterization and comparison of 1.2 kV SiC Power MOSFET[C]// IEEE ECCE,2013:3235-3242.
[24]FUNAKI T, SASAGAWA M, NAKAMURA T. Multi-chip SiC DMOSFET half-bridge power module for high temperature operation[C]//APEC,2012:2525-2529.
[25]NEAMEN D A. 半导体物理与器件[M].3 版. 赵毅强,姚素英,解晓东,等,译. 北京:电子工业出版社,2011:418-420.
[26]TANABE H, KOJIMA T, IMAKIIRE A. Comparison performance of Si-IGBT and SiC MOSFET used for high efficiency inverter of contactless power transfer system[C]//IEEE 11th ICPEDS, 2015:707-710.

相似文献/References:

[1]吴义伯,戴小平,王彦刚,等.IGBT 功率模块封装中先进互连技术研究进展[J].控制与信息技术(原大功率变流技术),2015,(02):6.[doi:10.13889/j.issn.2095-3631.2015.02.002]
 WU Yibo,DAI Xiaoping,WANG Yangang,et al.State-of-the-art Progress of Advanced InterconnectionTechnology for IGBT Power Module Packaging[J].High Power Converter Technology,2015,(05):6.[doi:10.13889/j.issn.2095-3631.2015.02.002]
[2]王晓元,王 雄,王幸智,等.大功率模块用水冷散热器的数值模拟与试验研究[J].控制与信息技术(原大功率变流技术),2015,(02):47.[doi:10.13889/j.issn.2095-3631.2015.02.010]
 WANG Xiaoyuan,WANG Xiong,WANG Xingzhi,et al.Numerical Simulation and Experimental Study of the Water-cooled Radiator for High Power Module[J].High Power Converter Technology,2015,(05):47.[doi:10.13889/j.issn.2095-3631.2015.02.010]
[3]刘建平,马振宇,孙保涛,等.两电平IGCT 功率模块母线杂散电感优化设计[J].控制与信息技术(原大功率变流技术),2015,(06):14.[doi:10.13889/j.issn.2095-3631.2015.06.003]
 LIU Jianping,MA Zhenyu,SUN Baotao,et al.Optimal Design of Stray Inductance of Busbar in Two-level IGCT Power Module[J].High Power Converter Technology,2015,(05):14.[doi:10.13889/j.issn.2095-3631.2015.06.003]
[4]王幸智,王 雄,姚 磊,等.水冷散热器鼓包原因及预防措施[J].控制与信息技术(原大功率变流技术),2016,(01):39.[doi:10.13889/j.issn.2095-3631.2016.01.009]
 WANG Xingzhi,WANG Xiong,YAO Lei,et al.Fault Analysis and Preventive Measures for Bulging of Water-cooled Radiator[J].High Power Converter Technology,2016,(05):39.[doi:10.13889/j.issn.2095-3631.2016.01.009]
[5]王晓元,王 雄,李彦涌,等.新型相变平板热管散热器的性能研究[J].控制与信息技术(原大功率变流技术),2016,(02):16.[doi:10.13889/j.issn.2095-3631.2016.02.004]
 WANG Xiaoyuan,WANG Xiong,LI Yanyong,et al.Performance Study of a New Phase Transition Flat Heat Pipe Radiator[J].High Power Converter Technology,2016,(05):16.[doi:10.13889/j.issn.2095-3631.2016.02.004]
[6]李保国,陈燕平,蒋云富,等.全功率风电变流器并联运行关键技术研究[J].控制与信息技术(原大功率变流技术),2016,(04):38.[doi:10.13889/j.issn.2095-3631.2016.04.008]
 LI Baoguo,CHEN Yanping,JIANG Yunfu,et al.Research on the Key Technologies of Parallel Operation for Full Power Wind Power Converter[J].High Power Converter Technology,2016,(05):38.[doi:10.13889/j.issn.2095-3631.2016.04.008]
[7]戴小平,等.全烧结型SiC 功率模块封装设计与研制[J].控制与信息技术(原大功率变流技术),2016,(05):36.[doi:10.13889/j.issn.2095-3631.2016.05.007]
 DAI Xiaoping,,et al.Packaging Consideration and Development for Fully Sintered SiC Power Module[J].High Power Converter Technology,2016,(05):36.[doi:10.13889/j.issn.2095-3631.2016.05.007]
[8]李诚瞻,常桂钦,彭勇殿,等.一种低感封装的1 200 V 混合碳化硅功率模块[J].控制与信息技术(原大功率变流技术),2016,(05):71.[doi:10.13889/j.issn.2095-3631.2016.05.015]
 LI Chengzhan,CHANG Guiqin,PENG Yongdian,et al.1 200 V Hybrid SiC Power Module with Low Stray Inductance[J].High Power Converter Technology,2016,(05):71.[doi:10.13889/j.issn.2095-3631.2016.05.015]

备注/Memo

备注/Memo:
收稿日期:2016-07-05
作者简介:刘可安(1972-),男,教授级高级工程师, 研究方向为牵引传动及网络控制技术、功率半导体器件及应用技术等。
基金项目:国家科技重大专项02 专项(2013ZX02305)
更新日期/Last Update: 2016-11-01