[1]丁杰,忻力,何海兴,等.二电平IGBT变频器载荷工况下损耗和温升计算程序的开发[J].控制与信息技术,2014,(01):1-4.[doi:10.13889/j.issn.2095-3631.2014.01.011]
 DING Jie,XIN Li,HE Hai-xing,et al.Program Development of Losses and Temperature Rise for Two-level IGBT Converter under Loading Conditions[J].High Power Converter Technology,2014,(01):1-4.[doi:10.13889/j.issn.2095-3631.2014.01.011]
点击复制

二电平IGBT变频器载荷工况下损耗和温升计算程序的开发()
分享到:

《控制与信息技术》[ISSN:2095-3631/CN:43-1486/U]

卷:
期数:
2014年01期
页码:
1-4
栏目:
变流与控制
出版日期:
2014-02-28

文章信息/Info

Title:
Program Development of Losses and Temperature Rise for Two-level IGBT Converter under Loading Conditions
文章编号:
2095-3631(2014)01-0001-04
作者:
丁杰忻力何海兴唐玉兔李卫红
南车株洲电力机车研究所有限公司
Author(s):
DING Jie XIN Li HE Hai-xing TANG Yu-tu LI Wei-hong
(CSR Zhuzhou Institute Co., Ltd., Zhuzhou, Hunan 412001, China)
关键词:
变频器损耗温升IGBT二电平载荷工况
Keywords:
converter losses temperature rise IGBT two-level loading condition
分类号:
TM46
DOI:
10.13889/j.issn.2095-3631.2014.01.011
文献标志码:
A
摘要:
介绍了采用IPOSIM和Simulation-Tool软件计算载荷工况下损耗和温升的方法,并对软件的计算方法作了改进,形成了二次开发程序,克服了原有软件对载荷点数量的限制。以某地铁车输变频器的动行数据为研究对象,通过程序计算得到了运行过程中的损耗、散热器温度、IGBT模块中芯片壳温及结温变化曲线,可为地铁车辆IGBT变频器的热设计工作提指导。
Abstract:
A method was introduced to calculate losses and temperature rise under loading condition via IPOSIM and Simulation-Tool software, and then made a further improvement in forming a secondary development program which eliminated the limitation of original software on load point number. Taking the running data of converters for a certain metro vehicle as a research object, curves of losses, radiator’s temperature, case’s temperature and chip-junction’s temperature of IGBT module in the operating process were obtained by the program, which can provide guidance for thermal design of IGBT converter for metro vehicle.

参考文献/References:

[1] 熊研,沈燕群,江剑,等. IGBT损耗计算和损耗模型研究[J] .电源技术应用,2006,9(5) :55-60.
[2] 胡建辉,李锦庚,邹继斌,等.变频器中IGBT模块损耗计算及散热系统设计[J]. 电工技术学报,2009,24(3):159-163.
[ 3] 毛鹏,谢少军,许泽刚. IGBT模块的开关暂态模型及损耗分析[J]. 中国电机工程学报,2010,30(15) :40-47.
[4] 景巍. 大功率三电平变频器功率器件损耗研究[D]. 江苏:中国矿业大学,2011.
[5] Srajber D, Lukasch W. The calculation of the power dissipation for the IGBT and the inverse diode in circuits with sinusoida l output voltage[C]// Proc. electronica’92:51-58.
[ 6] 丁杰,唐玉兔,忻力.一种改进的二电平IGBT变频器损耗计算方法[J]. 大功率变流技术,2013(4) :18- 21.
[7] Infineon Technologies AG. Dimensioning program IPOSIM for loss and thermal calculation of Infineon IGBT modules[EB/OL]. [2013-08-21].http://www.infineon.com/cms/en/product/channel. html?channel=ff80808112ab681d0112ab69e66f0362.
[8] Schnell R, Schlapbach U. Realistic benchmarking of IGBTmodules with the help of a fast and easy to use simulation-tool [C]//Proc. PCIM’2004. Germany, 2004.
[9] Semikron International. SEMISEL[CP/OL]. [2013-08-21]. http://www.semikron.com/skcompub/zh/index.htm.
[10] Power Device Works, Mitsubishi Electric. Power Loss Simulation Software User Manual[EB/OL] .[2013-05-16]. http://sem. mitsubishielectric.eu/products/power_semiconductors/melcosim.
[11] Fuji Electric Device Technology Co., Ltd. IGBT/FWD Power Loss Simulation ver. 4 User Manual[EB/OL]. [2013-05-16].http://www.fujielectric.co.jp/eng/fdt/scd/index.html.
[12] 何海兴,沈红平,王坚. 基于Matlab GUI的交流传动电力机车主电路仿真演示平台[J]. 大功率变流技术,2009(4):31-35.
[1 3 ] 桂翔. 城市轨道交通牵引计算仿真系统的研究和开发[D] .北京:北京交通大学,2008.

相似文献/References:

[1]陈明锋,雷万钧,付翀丽,等.T 型三电平结构SVG 的损耗研究[J].控制与信息技术,2015,(04):56.[doi:10.13889/j.issn.2095-3631.2015.04.011]
 CHEN Mingfeng,LEI Wanjun,FU Chongli,et al.Research on the Loss of Three-level T-type Inverter in SVG[J].High Power Converter Technology,2015,(01):56.[doi:10.13889/j.issn.2095-3631.2015.04.011]
[2]王 婷,梁志伟,刘海涛,等.基于PWM整流的商用中央空调变频器的研究与开发[J].控制与信息技术,2015,(01):56.[doi:10.13889/j.issn.2095-3631.2015.01.013]
 WANG Ting,LIANG Zhiwei,LIU Haitao,et al.Research and Development of Commercial Central Air-conditioning Inverter Based on PWM Rectifier[J].High Power Converter Technology,2015,(01):56.[doi:10.13889/j.issn.2095-3631.2015.01.013]
[3]许雄伟,郭锐,陈林,等.基于8400 StateLine 变频器的2 MW风力发电机组偏航系统设计[J].控制与信息技术,2014,(04):28.[doi:10.13889/j.issn.2095-3631.2014.04.007]
 XU Xiong-wei,GUO Rui,CHEN Lin,et al.Design of the Yaw System for 2 MW Wind Turbine Based on 8400 StateLine Converter[J].High Power Converter Technology,2014,(01):28.[doi:10.13889/j.issn.2095-3631.2014.04.007]
[4]李彦涌,胡家喜,孙保涛.一种结构紧凑的三联对称式IGCT 相模块的设计[J].控制与信息技术,2015,(06):8.[doi:10.13889/j.issn.2095-3631.2015.06.002]
 LI Yanyong,HU Jiaxi,SUN Baotao.Design of a Tri-linked Symmetry IGCT Phase Module with Compact Structure[J].High Power Converter Technology,2015,(01):8.[doi:10.13889/j.issn.2095-3631.2015.06.002]
[5]江平,梅文庆,甘韦韦,等.大功率变频电源超速区自激损坏分析及系统设计[J].控制与信息技术,2014,(01):28.[doi:10.13889/j.issn.2095-3631.2014.01.007]
 JIANG Ping,MEI Wen-qing,GAN Wei-wei,et al.Analysis of Self-excited Damage and System Design for High-power Variable Frequency Power Supply in Overspeed Region[J].High Power Converter Technology,2014,(01):28.[doi:10.13889/j.issn.2095-3631.2014.01.007]
[6]刘辉荣,付如愿,韩志成,等.石油钻机变频器控制系统网络冗余研究[J].控制与信息技术,2013,(02):27.[doi:10.13889/j.issn.2095-3631.2013.02.001]
 LIU Hui-rong,FU Ru-yuan,HAN Zhi-cheng,et al.Research of Redundant Network Control System Based on Oil Drilling Inverter[J].High Power Converter Technology,2013,(01):27.[doi:10.13889/j.issn.2095-3631.2013.02.001]
[7]李彦涌,忻 力,赖 伟,等.基于现场数据的IGBT 结温实时计算[J].控制与信息技术,2017,(01):24.[doi:10.13889/j.issn.2095-3631.2017.01.005]
 LI Yanyong,XIN Li,LAI Wei,et al.IGBT Real-time Junction Temperature Calculation Based on Converter Operation Data[J].High Power Converter Technology,2017,(01):24.[doi:10.13889/j.issn.2095-3631.2017.01.005]
[8]江平,梅文庆,杨大成,等.石油钻机驱动变频器控制系统研究[J].控制与信息技术,2012,(04):43.[doi:10.13889/j.issn.2095-3631.2012.04.001]
 JIANG Ping,MEI Wen-qing,YANG Da-cheng,et al.Research on the Control System of the Converter for Oil Drilling Drive[J].High Power Converter Technology,2012,(01):43.[doi:10.13889/j.issn.2095-3631.2012.04.001]
[9]黄敏,梅文庆,王婷,等.基于变频技术的石油钻井系统改造[J].控制与信息技术,2012,(02):55.[doi:10.13889/j.issn.2095-3631.2012.02.001]
 HUANG Min,MEI Wen-qing,WANG Ting,et al.Modification of the Oil Drilling System Based on Converter Technology[J].High Power Converter Technology,2012,(01):55.[doi:10.13889/j.issn.2095-3631.2012.02.001]
[10]张少云,刘斐,张铁军,等.一种变频器和工频电网之间同步切换的方法[J].控制与信息技术,2011,(03):51.[doi:10.13889/j.issn.2095-3631.2011.03.013]
[11]丁杰,唐玉兔,忻力.一种改进的二电平IGBT变频器损耗计算方法[J].控制与信息技术,2013,(04):18.[doi:10.13889/j.issn.2095-3631.2013.04.007]
 DING Jie,TANG Yu-tu,XIN Li.An Improved Method of Loss Calculation for Two-level IGBT Converters[J].High Power Converter Technology,2013,(01):18.[doi:10.13889/j.issn.2095-3631.2013.04.007]

备注/Memo

备注/Memo:
收稿日期:2013- 04- 08
作者简介:丁杰(1979- ),男,硕士,工程师,现主要从事变流器结构仿真和热仿真的研究开发工作。
基金项目:湖南省自然科学省市联合基金重点项目(项目编号: 12JJ8020)
更新日期/Last Update: 2016-05-10